
MAINTENANCE
SeaLand
has endeavored to provide the boat owner with a sanitation system which provides
"At Home" convenience and reliability.
As with any quality product, satisfactory use depends on proper maintenance.
Normal parts replacement varies with frequency of use,
quality of flushing water, etc. Seacoast Services has found that replacing the
Bowl Seal, Flush Ball and Duck Bill Valves every 3-4 years will
give you an advantage in having a trouble free season. Also check for rusted
hose clamps and tightness, kinked and permeated hoses,
level indicator probes, vent filter, wire connections for corrosion.

FREE SHIPPING ON SELECTED MAINTENANCE KITS
Your Invoice will be Adjusted
before your Credit Card is Charged

 |

Basic Maintenance Kit: ( You
$ave )
Bowl Seal
Ball, Shaft, Spring Cartridge Kit
Duck Bill Valves (2 Kits)
Installation Instructions Included
Now shipping with a free pair of
disposable gloves
$99.99
Your Invoice will be Adjusted before your Credit Card is Charged
|

 |

Standard
Maintenance Kit*:
( You $ave )
Bowl Seal
Ball, Shaft, Spring Cartridge Kit
Duck Bill Valves (2 Kits)
Water Valve
Vacuum Breaker
Installation Instructions Included
Now shipping with a free pair of
disposable gloves
$158.99
Your Invoice will be Adjusted before your Credit Card is Charged
|
No Picture
 |

Deluxe Maintenance Kit*: ( You
$ave
15% )Bowl Seal
Ball, Shaft, Spring Cartridge
Duck Bill Valves (2 Kits)
Water Valve
Vacuum Breaker
Whisper
Pump Motor (12 or 24 volt)
Installation Instructions Included
Now shipping with a free pair of
disposable gloves
12 Volt / $344.99
Your Invoice will be Adjusted before your Credit Card is Charged
24
Volt / $369.99 Your
Invoice will be Adjusted before your Credit Card is Charged
|
No Picture
|

Vacuum Pump Rebuild Kit: (You $ave 10% )
Duck Bill Valves (2 Kits)
1- Bellows w/Clamps
1- O' Ring Kit
Installation Instructions Included
Now shipping with a free pair of
disposable gloves
Clamp Style Pump / $149.99 (before 1990)
Bolt Style Pump / $129.99 (after 1990)
|
 |
Bellows:
Fits all SeaLand Vacuum Pumps (S series) and all
SeaLand Discharge Pumps (T series)
Part # 230980
|
 |
O' Ring
Replacement Kit:
(Bolt Style Pump)
Installation Instructions Included
Part# 310151
|
 |
O' Ring
Replacement Kit:
(Clamp style Pump - 1990 & older)
Installation Instructions Included
Part# 319039
|

|
Duck Bill Valves: 1 1/2"
Fits all SeaLand Vacuum Pumps (S series) 2 kits required
Fits all SeaLand Discharge Pumps (T series) 1 kit required
Part# 310076 (1 kit )
$20.99
|

For these style pumps |
 |
Duck Bill Valves: 2"
Fits SeaLand "New" VG4 J Series Vacuum Generator 2 kits required
Part# 311208
(1 kit )
$23.99
|

For this style pump |
 |
Water Valve:
Fits all SeaLand VacuFlush® And
Traveler®
Toilets
( foot pedal operation )
Installation Instructions Included
Part# 314349
|
|
 |
Bowl Seal:
Fits all SeaLand VacuFlush®
and Traveler® Toilets
The new Bowl Seal is a two-piece design with a thick outer
rubber ring and a Teflon-coated inner ring. The two pieces
fit together to provide the ultimate barrier against bowl leakage, while the
Teflon coating allows the flush ball to open and close easily and prevents
mineral build-up on the seal. *Service
Tip: we recommend replacing your flush ball everytime you replace your bowl
seal so that you get the best seal possible.
Installation Instructions Included
Part# 316140
|
 |
Ball & Shaft w/Spring Cartridge Kit:
Fits SeaLand VacuFlush® and Traveler Toilets
Models:
800,900,1000,2000,500, 500+ (Foot Pedal Operation)
w/NEW BRASS SHAFT & White
Spring Cartridge
*Service Tip: we recommend replacing your bowl seal
everytime
you replace your flush ball so that you get the best seal possible.
Installation Instructions Included
Part# 318162
|
|
|
| |
Ball & Shaft w/Spring Cartridge Kit:
Fits SeaLand VacuFlush® and Traveler Toilets
Models:
Eco Toilets 140,150 & 5000 Series Foot Pedal
Operation
w/NEW BRASS SHAFT & Black
Spring Cartridge
*Service Tip: we recommend replacing your bowl seal
everytime
you replace your flush ball so that you get the best seal possible.
Installation Instructions Included
Part# 310681
|
|
|
 |
Vacuum Breaker Kit:
Fits VacuFlush® and Traveler® Toilets ( fits
all 100, 800, 900, 1000, 2000, and 500+ Series Toilets)
Not to be used w/hand spray
Part# 316906
|
 |
Vacuum Breaker Kit:
Fits VacuFlush® and Traveler® Toilets ( fits
all 500 Series Toilets) Not be used w/hand spray
Part# 318065
|
 |
Floor Flange Sponge Seal:
Fits VacuFlush® Toilets models- 506,806,1006 and all Traveler® Toilets
Part# 314549
|
 |

Pump Whisper Motor
Fits all SeaLand Vacuum Pumps (S series)
Part# 310245 (12vt.)
Includes Eccentric & Shoulder Bolt
*You need to upgrade your bellows if your pump is 2006 or older,
the new bellows are white (230980) was redesigned to accommodate this motor, The new
bellows assembly alone will work with any motor
Part# 310246 (24vt.) Includes Eccentric & Shoulder
Bolt
*You need to upgrade your bellows if your pump is 2006 or older,
the new bellows are white (230980) was redesigned to accommodate this motor, The new
bellows assembly alone will work with any motor
Part# 310247 (32vt.)
Not Available
|

 |
Vacuum Switch:
Vacuum Generator II (push type)
Part# 310540
Your
Invoice will be Adjusted before your Credit Card is Charged
|


|
Vacuum Switch:
Tank Type (screw type)
Part# 318032
Your
Invoice will be Adjusted before your Credit Card is Charged |
 |
Vacuum Tester Gauge:
A must for finding vacuum leaks.
Instructions Included
Part# 530002
|
 |
Toilet Seat:
Fits VacuFlush® & Traveler® Toilets ( fits
all 100, 800, 900, 1000, 2000, Series Toilets)
L=14" x W=14"
|
 |
Toilet Seat:
Fits VacuFlush® 500, 500+, 5000
& Traveler® 500, 500+ Series
Toilets
L=15 1/2" x W=14 3/8"
|